10-27-2020 05:28 AM
We are trying to configure the connector for our Umbrella account onto our ASA 5500-X so that we don't have to use the forwarders that are currently configured. However we are getting (see attached) error. I know I've followed this guide to a T https://docs.umbrella.com/hardware-integrations/docs/cisco-adaptive-security-appliance-asa-solution-guide-for-umbrella
and can't figure out what is missing. I feel as tho it is a license, or a IOS upgrade that we are missing however our firmware version is the most up-to-date one we can currently download, and according to the pre-reqs we meet every requirement in order to do this.
10-27-2020 12:18 PM
Hi @rdutcher
You need to be running ASA version 9.10.1 or above, if your hardware does not support this version then you cannot run the umbrella connector.
HTH
10-29-2020 01:04 PM
Okay, I figured this was the case, however when we received this device a couple months ago I believed my manager had downloaded the correct version needed. I'm downloading an updated ASA version, and compatible ASDM right now, I'll have everything loaded this weekend and let you know if it works.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide