I have a question and would need some advise if there is any solution to this.
Scenario A (Internal): External caller calls in to a user, and the user transfers the call, the incoming call displayed would be shown as the original caller (external) on Jabber for windows when the user who picked up the call presses on the transfer and hangs up.
Scenario B (MRA - Mobile clients): same as the above, but the incoming call always shows the person whom is transferring the call and never the external caller.
Is there something that i may have left out for MRA configuration? Or on the voice router?
Table of Contents:
1. Reference URLs
2. Type of Certificates
3. Regenerate certificates that have no CTL/ITL impact [no phone impact]
4. Regenerate certificates that have CTL/ITL impact [medium phone impact]
5. Step to delete expired certif...
I have been using the recent release of the WebEx Desktop App (39.9) which has Wireless Sharing feature. Prior to this, we were using the proximity application for sharing, where we can find the performance logs on the %temp% folder of the client machine....
Cisco Recommends Dual NIC deployment for Expressways. But single NIC deployment can be achieved. Points to be noted for single NIC: > Firewall must support NAT Reflection, if not then you can use dual NATing to achieve NAT reflection on unsup...
Learn how Cisco is transforming how you communicate in the modern workplace with new capabilities like expanded Webex calling, unified app experiences, and intelligent devices and tools.
Webex Unified Platform
Deep Dive Briefings