11-14-2015 02:24 AM - edited 03-17-2019 05:40 PM
Dear Guys,
Anyone can help for this issue :
we wait for your advice
many thank
regards,
bayu
11-15-2015 06:37 PM
Hi Bayu,
Please check the following link and verify the conig accordingly
http://www.cisco.com/c/en/us/support/docs/unified-communications/expressway/118798-technote-cucm-00.html#anc13
Manish
- Do rate helpful posts -
11-15-2015 08:45 PM
Hi Manish,
Jabber is succesfully login and have ext via expressway,
if call from external jabber via internet , not hear voice call and reject after 30 second.
Thanks
11-15-2015 08:45 PM
Hi,
For no Media When You Call Through MRA the following can be an issue:
In a single NIC deployment with NAT configured, these parameters are either missing or not configured correctly:
xConfiguration Ethernet 1 IP V4 Address: "<Internal_IP>"
xConfiguration Ethernet 1 IP V4 StaticNAT Address: "<Public_IP>"
xConfiguration Ethernet 1 IP V4 StaticNAT Mode: "On"
11-20-2015 12:41 AM
Hi Manish,
today i have implement on my expresssway E using dual NIC deployment.
but still cannot hear voice and video.
I have follow your suggesstion using NAT on expressway E via CLI command, but is same.
please your advise and suggestions
thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide