cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
1249
Views
0
Helpful
1
Replies
delacruze
Beginner

Cisco Jabber mobile handoff configuration.

I am configuring Cisco Jabber on iPhones.  So far it is working fine with the exception of the Transfer to Mobile Network feature.  In the documentation it states go to Call Routing > Mobility Configuration (we are running 8.6(2a) and we get Call Routing > Mobility > Handoff Configuration which I am assuming is the same thing?)

There is only room for one number (see attached). 

It states: Enter the Direct Inward Dial (DID) number that the iPhone will dial to handoff a VoIP call to the mobile network. The service provider must deliver the DID digits exactly as configured.

It also states translation patterns cannot be used.  So do I choose one of our DID block numbers (not yet created as a translation pattern) and enter as following?

14045551234

Or since we use 9 to dial out...

914045551234

I have tried both, but it still fails.  Any ideas?

1 REPLY 1

Eric

You may want to post this is the voice call manager forum.

Sent from Cisco Technical Support iPhone App

"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
___________________________________________________________
Create
Recognize Your Peers
Content for Community-Ad