Cisco Webex meeting server deployment and configuration Guide

[yeruel77]

Hi Team, I purchased Cisco webex WBXMTSVR2-UWLUSRK9 -WebEx Meetings Server 2.x Users- 50 users with LIC-CMS-PAK. So I am goign to deploy in my virtual server. I want to deploy to use for internal and external for customer. I just want to meet with customer using my webex meeting center by invite them. And I wan to integrate with jabber by using phone services and UC services integration. Please any consult on design and configuration, Requirment, deployment guide. Is it public IP and Public DNS needed for external?

[dpetrovi]

Hi,

Please, take a look at these guides:

http://www.cisco.com/c/en/us/td/docs/collaboration/CWMS/2_8/Planning_Guide/cwms_b_planning-guide-system-requirements-cwms-2-8.html

http://www.cisco.com/c/en/us/td/docs/collaboration/CWMS/2_8/Administration_Guide/cwms_b_cwms-administration-2-8.html

Let us know of any specific questions you might have.

-Dejan

[yeruel77]

Hi dpetrovi,

Thanks for reply,

is CUMS  supported on VMware with third party hardware HP server with same requirment and spec? I have read on your link that third party hardware not supported. 

[dpetrovi]

Cisco UCS hardware is required. No 3rd party hardware is tested or supported.

-Dejan

[yeruel77]

Oh,

I have ordered HP server with vmware for Webex meeting center deployment.