07-08-2015 09:38 AM - edited 03-17-2019 05:20 PM
07-08-2015 10:04 AM
Hi Nick,
Do you by any chance have the jabber status as DND? This might happen when the CSF device is put to DND status.
Regards
07-08-2015 10:49 AM
Nagajothi,
After reading your post I put Jabber into DND and call the line. The beep is the same. When moving from DND to Available, I was hoping this would fix it but it did not. Still get one beep on incoming calls, and that is it. The Jabber popup sits there waiting for me to hit Answer or Decline but never makes another sound and it popsdown when the caller hangs up or it goes to voicemail.
12-18-2015 11:04 AM
Did anyone find a solution for this? We have the same issue- Jabber just beeps twice and no ring tone.
I just installed the last version for PC 11.1.2 with the same issue also on MAC 11.1
12-18-2015 11:23 AM
I'm happy to report issue is resolved for me. A new support engineer we hired finally discovered it.
There is apparently a DND setting also at the user's back end profile level, and mine got set (unclear how) during a minor upgrade in April or May. Once he cleared that, it worked perfectly on 2 different computers.
Have you UC admin check your profile for that.
12-18-2015 11:36 AM
I just checked the user profile on Call Manager and didn't find any DND settings. Do you refer to WebEx connect profile? or CM - If CM can you let me know what exactly is done to resolve?
Thank you
12-18-2015 11:47 AM
I can't profess to know a lot about the back end, but the engineer said it was something I could control in the Self Care Portal, which I was not aware of. That portal is fairly recent for us.
I've attached a snapshot of what I see. Apparently that first setting got turned on. Once he found that and cleared it, my ringer started working.
Hope this helps.
12-18-2015 03:18 PM
Looks like you have a CP server- In our case we have WebEx connect (Jabber cloud) so I don't have these settings. However DND is also in Jabber client but it didn't make any difference when I checked or unchecked it.
12-18-2015 03:43 PM
Found the solution on user FWC profile - as mentioned DND option should be unchecked. Thanks - I just tested and it works.
04-22-2016 08:47 AM
Thank you, I had someone with this exact problem and this was indeed the root cause.
02-19-2020 02:57 AM
We had the same issue, which have been solved with your help. THANKS
08-20-2020 12:18 PM
Very useful, thanks
08-21-2015 02:24 PM
I have this exact problem too... a quick double beep instead of the selected ringtone. Additionally, I have Ringers/Alerts under the Audio options set to All Devices, but it will only send the beep to selected speaker device ONLY.
Our system admin is at a loss to explain or reproduce it. This REALLY hampers my ability to provide support.
Currently running 10.6.3 Build 61622, but my sysadmin and I tried upgrading to 11.0+, with the same result.
It worked fine until one particular backend upgrade back in late April or early May.
Thanks.
09-18-2015 05:26 AM
I have also seen the same behaviour. The jabber is not on DND and when a call comes in I only see the popup window and some beeps that are repetitive I think.
I answer the call and then I hang up. The next call seems to be fine (there is the default ringtone as expected). This usually happens for the first call after I start my jabber
Jabber is 10.6.4
CUCM is 10.5.2.11900-3
02-26-2018 08:35 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide