Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
725
Views
0
Helpful
1
Replies

CUCI LYNC application has just stopped working

Go to solution
Jeff Sargant
Level 1
Level 1

‎11-18-2013 03:34 AM - edited ‎03-17-2019 03:43 PM

Hi guys, anyone come up with this issues with CUCI LYNC, the application has just stopped working, the error in the application log is "could not connect to device provider". It was all working fine and just stopped working, and unaware of any changes to the system which is 6.142190-3. Cisco UC Integration for Microsoft LYNC version 8.6(2.20916) & Microsoft OC 2007 r2

Thanks in advance

Jeff

Sent from Cisco Technical Support iPad App

Labels:
Preview file
223 KB
0 Helpful
1 Accepted Solution

Accepted Solutions

Go to solution
Jeff Sargant
Level 1
Level 1

‎11-21-2013 01:39 PM

Just in case anyone else has this problem, the Tomcat certificate on the cluster had expired. Until you can schedule a change to resolve it, you can put the following in the regkey "ccmcipservervalidation" =0 and restart, it should then log in if it were the same issue.

Sent from Cisco Technical Support iPad App

View solution in original post

0 Helpful
1 Reply 1

Go to solution
Jeff Sargant
Level 1
Level 1

‎11-21-2013 01:39 PM

Just in case anyone else has this problem, the Tomcat certificate on the cluster had expired. Until you can schedule a change to resolve it, you can put the following in the regkey "ccmcipservervalidation" =0 and restart, it should then log in if it were the same issue.

Sent from Cisco Technical Support iPad App

0 Helpful
Customers Also Viewed These Support Documents