10-08-2020 03:49 AM
i am a fresh CUE installed on a ISM module installed on Cisco2921 CME router.
we need to configure AA for incoming calls.
i am using a simple AA script. 6000 is the calledin number configured on CUE for AA application.
dial-peer voice 6000 voip
destination-pattern 6000
session protocol sipv2
session target ipv4:192.168.10.250
dtmf-relay sip-notify
codec g711ulaw
no vad
voice-port 0/0/0
connection plar-opx 6000
but the problem is when no incoming calls is been routed.
even if i dial 6000 from a local phone the autoattendent is not answering and its giving a busy tone.
one CUE if i change the number of session to 2 its showing there are no enough license.
i think there problem is related to port license.
please advise
10-08-2020 05:30 AM
Hope you are using demo license, try not to use voicemail and AA together if you have license shortage. Go Through below link for
.
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/unity_exp/design/design21/cuedg21/cueaades.html
10-10-2020 08:38 AM
we are only using the AA application. Voicemail is not currently configured and is not operational.
when i change the port license setting the system gives an alert that license is not enough even if i change the # of ports to 1 only.
i am not sure what license is required and whats the part number to order.
due to 0 port license the AA is not working as per my finding.
10-10-2020 02:03 PM
What version you using?
10-10-2020 03:38 PM
8.6.5
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide