10-14-2013 12:05 PM - edited 03-17-2019 03:38 PM
I am preparing for a HA CWMS 1.5 install without IRP. The install will also have a cold failover in a different data center. I am trying to understand the disk requirements for each host. The install document says 1TB disk is required.
If I have an install with 3 servers is that 3 x 1TB?
Is there separate storage via NFS for recordings?
Solved! Go to Solution.
10-16-2013 07:26 AM
Hi David,
1TB is a requirement for all internal machines, while 300GB is a requirement for IRP servers.
1TB is needed regardless of NFS storage.
NFS storage capacity you will define based on your system's size and usage (
http://www.cisco.com/en/US/docs/collaboration/CWMS/1_5/Release_Notes.html#reference_C12B6A95E41C4D3199E6F20BC339D30A) and can add it later.
I hope this clarifies is a little bit.
-Dejan
10-16-2013 07:21 AM
Can anyone help with the disk requirements?
Can you install the application with 200G and just mount via NFS storage for recordings?
10-16-2013 07:26 AM
Hi David,
1TB is a requirement for all internal machines, while 300GB is a requirement for IRP servers.
1TB is needed regardless of NFS storage.
NFS storage capacity you will define based on your system's size and usage (
http://www.cisco.com/en/US/docs/collaboration/CWMS/1_5/Release_Notes.html#reference_C12B6A95E41C4D3199E6F20BC339D30A) and can add it later.
I hope this clarifies is a little bit.
-Dejan
10-16-2013 09:28 AM
Thank you for the response. This does help.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide