cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1160
Views
0
Helpful
3
Replies

CWMS 1.5 install disk requirements

ddombektmg
Level 1
Level 1

I am preparing for a HA CWMS 1.5 install without IRP.  The install will also have a cold failover in a different data center.  I am trying to understand the disk requirements for each host.  The install document says 1TB disk is required. 

If I have an install with 3 servers is that 3 x 1TB? 

Is there separate storage via NFS for recordings?

1 Accepted Solution

Accepted Solutions

Hi David,

1TB is a requirement for all internal machines, while 300GB is a requirement for IRP servers.

1TB is needed regardless of NFS storage.

NFS storage capacity you will define based on your system's size and usage (

http://www.cisco.com/en/US/docs/collaboration/CWMS/1_5/Release_Notes.html#reference_C12B6A95E41C4D3199E6F20BC339D30A) and can add it later.

I hope this clarifies is a little bit.

-Dejan

View solution in original post

3 Replies 3

ddombektmg
Level 1
Level 1

Can anyone help with the disk requirements?

Can you install the application with 200G and just mount via NFS storage for recordings?

Hi David,

1TB is a requirement for all internal machines, while 300GB is a requirement for IRP servers.

1TB is needed regardless of NFS storage.

NFS storage capacity you will define based on your system's size and usage (

http://www.cisco.com/en/US/docs/collaboration/CWMS/1_5/Release_Notes.html#reference_C12B6A95E41C4D3199E6F20BC339D30A) and can add it later.

I hope this clarifies is a little bit.

-Dejan

Thank you for the response.  This does help.