03-29-2016 01:39 AM - edited 03-17-2019 05:59 PM
Hi
what is the NFS version used by CWMS in Recording storage server ?
is port 1110 is required to work ?
best regrads,
Ahmed Mohammedy
03-29-2016 05:21 AM
Hi Ahmed,
The following ports are required for NFS:
Before You Begin
Port 22 is used for Secure Storage.
Ports 111, 1110, 2049, 4045 are used for NFS storage.
Kind regards,
-Dejan
04-05-2016 02:15 AM
04-06-2016 07:43 AM
Hi Ahmed,
SSHFS is supported, so SFTP server that uses SSHFS is supported. http://www.cisco.com/c/en/us/td/docs/collaboration/CWMS/2_6/Administration_Guide/Administration_Guide/Administration_Guide_chapter_01101.html#task_4A68696836634ECDADFE4B8223540617
-Dejan
04-12-2016 05:58 AM
Hi Dejan
I have CWMS version 2.5.1.29.B-AE
although the below 2.5 Admin document
http://www.cisco.com/c/en/us/td/docs/collaboration/CWMS/2_5/Administration_Guide/Administration_Guide/Administration_Guide_chapter_01110.html#task_4A68696836634ECDADFE4B8223540617
states that I can add secure storage but it is not available in Administration as per the attached Screenshot
Is SFTP only available in 2.6 ?
best regards
Ahmed
04-12-2016 06:00 AM
Hi Ahmed,
Secure Storage is added in 2.5 MR3 and later. http://www.cisco.com/c/en/us/td/docs/collaboration/CWMS/2_5/Release_Notes/Release_Notes.html#concept_B2DFFDBE541047AFBA4628943B3AF91A
Kind regards,
-Dejan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide