I have a strange issue at a customer with the following szenario:
Jabber for Windows 9.2
Cisco 8945 SCCP IP phone
The Jabber client is controlling the phone via CTI. If now an external call is comming in through an MGCP GW, the user cannot ignore the call and send it to voicemail. The user can press the button, but nothing is happening and the phone keeps ringing.
The strange thing is that:
- for internal calls, this is working all time
- If you use a CSF (jabber in softphone mode) also external calls can be sent to voicemail
--> it is just not working, if an SCCP phone is controlled and the call is comming via an MGCP GW
--> CSF and IP Phone are configured 100% the same
--> GW, SIP Trunks and phones were for testing in the same region and location to check for codec missmatch
--> different firmwares for the phones tested
Did anyone of you had some issues with that as well?
hi Team, we are planning to deploy Multi-Factor Authentication for Jabber. The main requirement is to use MFA over internet (MRA).Is it possible to deploy MFA just for MRA and don't touch impact any on-prem existing setup?Can someone please guide on ...
Looking to expand your professional network? Interested in gaining an edge with exclusive technology insights? Engage with Cisco experts, share feedback on products and connect with peers from across the globe. Cisco Champion 2021 applications are open fo...
UCCX does not natively protect HTTP Triggers.
I wanted to come up with a solution to handle HTTP cookie based authentication.
There is a zip file for this project attached to this article. It was written on UCCX 12.5...
CUCM can backup the manually or have sehchduler to backup the configuration and historical reports from the server diester recovery systemStep 1. Navigate to CUCM > Disaster Recovery System > Backup > Manual Backup as shown in the...