cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
8786
Views
5
Helpful
4
Replies

Jabber Single Sign On

stevericks
Level 1
Level 1

I have been looking into single sign on for Jabber 10.5.

It is incredibly difficult!

I have spent a day trying to set up OpenAM, got excited when it said configuration success, now Im looking at a spinning wheel while it fails to load the login page. And I don't think Im at the complicated bit yet!

Im not even sure if we can do it with our servers on version 8.6, is it possible? Or do we need to upgrade?

Even then, why does it not link in with AD? It does for directory names.

Has anybody set this up correctly and have a step by step guide they could post? It would be much appreciated.

 

Thanks,

 

Steve.

1 Accepted Solution

Accepted Solutions

Correct, that's why I posted the requirements:

Cisco Unified Communications applications, release 10.0(1) or later.

    Doesn't mean Jabber, it means, CUCM, CUC, IM&P, etc.
    HTH

    java

    if this helps, please rate

    View solution in original post

    4 Replies 4

    Jaime Valencia
    Cisco Employee
    Cisco Employee

    Software Requirements

    The SAML SSO feature requires the following software components:

    • Cisco Unified Communications applications, release 10.0(1) or later.
    • An LDAP server that is trusted by the IdP server and supported by Cisco Unified Communications applications.
    • A supported IdP server that complies with SAML 2.0 standard.

    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/SAML_SSO_deployment_guide/10_5_1/CUCM_BK_S52C3A64_00_saml-sso-deployment-guide-105/CUCM_BK_S52C3A64_00_saml-sso-deployment-guide-105_chapter_01.html 

    HTH

    java

    if this helps, please rate

    The document gives a lovely overview, but it doesn't really show me how to implement it. Is there a more 'step by step Guide' out there for non Cisco telecoms experts?

     

    As for the components, I'm presuming....

     

    • Cisco Unified Communications applications, release 10.0(1) or later.
      • Jabber 10.5 then is OK?
    • An LDAP server that is trusted by the IdP server and supported by Cisco Unified Communications applications.
      • LDAP server could be Microsoft AD?
    • A supported IdP server that complies with SAML 2.0 standard.
      • This would be the OpenAM part?

     

    Steve.

    Just got to a step in the document that I cant do on CUCM 8.6. There is no SAML option.

    So presumably we need an upgrade first.

     

    Step 1   Log in to the Cisco Unified CM Administration user interface.
    Step 2  

    Choose System > SAML Single Sign-On and the SAML Single Sign-On Configuration window opens.

    Correct, that's why I posted the requirements:

    Cisco Unified Communications applications, release 10.0(1) or later.

      Doesn't mean Jabber, it means, CUCM, CUC, IM&P, etc.
      HTH

      java

      if this helps, please rate
      Getting Started

      Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: