06-22-2015 12:50 AM - edited 03-17-2019 05:17 PM
Hi to everyone, i need some explanation here, this is the scenario CME 8.6 connected to one CUCM 10.5 through sip trunk.
I can have the presence of the lines of the remote system configuring the BLF on the sep devices on the CME and on the CUCM, but I don't find the way to do the same thing for the CSF devices on the CUCM.
There is a way to do that? to get the remote status of the dn of the CME on my jabber for windows client registered on the CUCM?
Solved! Go to Solution.
06-22-2015 09:33 AM
You don't monitor devices, you monitor users, and yes, for other systems, you need federation.
There is no concept of BLF as such with the phones in Jabber, you get the status of a user's device, proxy the user / device / line association that is in place between CUCM and IM&P SIP trunk.
06-22-2015 09:14 AM
No, because you can only add users to Jabber, not the devices directly. You get the on a call status thru all the device / line / user associations in place.
06-22-2015 09:29 AM
So the only way to get the status of the remote device on jabber is using a federation or something like?
Jabber doesn't have the blf function, this is my limit here right?
06-22-2015 09:33 AM
You don't monitor devices, you monitor users, and yes, for other systems, you need federation.
There is no concept of BLF as such with the phones in Jabber, you get the status of a user's device, proxy the user / device / line association that is in place between CUCM and IM&P SIP trunk.
06-22-2015 09:36 AM
Excellent thanks for the clarification
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide