Non TRC supported Servers for UC applications CUCM, Unity & UCCX 11.5 or 12

[Mohnish Dhurve]

Hello,

I need to know Non TRC servers support for UC applications. can someone please send me details about what all Non TRC servers are supported for UC applications i.e. CUCM, Unity etc. for version 11.5 or 12.

User capacity: 7500 /node

can i use any HP, IBM. DELL servers with the minimum VM requirements given in the documents?

[Shalid Kurunnan Chalil]

Hi Mohnish, The best place to look for this information is - https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/virtualization/virtualization-cisco-unified-communications-manager.html When it comes to third-party hardware, you can pretty much any if it satisfies the resources and specifications mentioned in the above document. Cisco does not support virtualization on legacy OEM HP/IBM servers Regards, Shalid Please remember to rate useful posts, by clicking on the stars below.

[Mohnish Dhurve]

Thanks a lot Shalid. will check and plan accordingly.

[Jaime Valencia]

The information around that is here:

https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/virtualization/cisco-collaboration-virtualization.html

You'll have to review several links to fully understand the implications regarding using 3rd party HW, around support, requirements, guidelines, etc.

It will be up to YOU to qualify whether the server you want to use meets the guidelines, or not.

Short answer to your question is: yes, as long as you meet the requirements.

[Mohnish Dhurve]

Thanks a lot Jaime. will check and plan accordingly. :-)