cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
508
Views
0
Helpful
1
Replies

PCD migration UFF step fails on IMP

MrCat
Level 1
Level 1

Hi there,

I keep getting UFF export/import step failed only for the IMP nodes while doing migration using PCD v14 doing migration from CUCM 12.0 to 12.5. The CUCM step is successful.

So far I have found a bug https://bst.cisco.com/bugsearch/bug/CSCvy53905

The bug is only about import step, and in my case it is actually both export and import steps that fail.

What bothers me is that it does not always get failed, I ran migration ones and it was successful on both steps, then reran it and it failed at the IMP nodes UFF export/import so I had to resume. At the end the system works and seems to be fine following the migration.

I wonder if anybody else experienced same problem. 

 

Thanks

1 Reply 1

MrCat
Level 1
Level 1

I opened a case with Cisco TAC, was told that it can fail intermittently and  I can just resume migration task at both failed steps, as there are no UFF features to export/import from IMP nodes,  relating both import/export failed tasks to the same bug CSCvy53905.