Solved: vTS support in Webex Enabled TelePresence

Plu05wrnn · ‎02-27-2015

Hello,

We are using vTS ver 4.0(1.57).

We are going to test Webex Enabled TelePresence but we don't know how to integrate vTS with VCS at the moment.

Currently it's integrated only with Conductor.

IS vTS supported in such a deployment ? Can you help us ?

Thank you !

Best Regards,

Tomasz

Patrick Sparkman · ‎02-27-2015

Virtual TelePresence Server requires Conductor to function, and cannot be registered to VCS directly. You'd setup the TP Server and Conductor, and create a SIP trunk between Conductor and VCS using the B2BUA. TMS 14.6, Conductor XC3.0, and TelePresence Server 4.1 are the supported versions for CMR Hybrid (WebEx Enabled TelePresence). Details can be found in the TMS 14.6 and Conductor XC3.0 Deployment Guide.

If you haven't already contacted a Cisco partner to go through the A2Q process with you, they will go through your environment with you and make sure you meet the requirements and everything is deployed correct. Once that is done, then your WebEx site will be configured for CMR Hyrbid. Details can be found in the CMR Hyrbid Release Notes (TMS 14.6).

View solution in original post

Patrick Sparkman · ‎02-27-2015

Virtual TelePresence Server requires Conductor to function, and cannot be registered to VCS directly. You'd setup the TP Server and Conductor, and create a SIP trunk between Conductor and VCS using the B2BUA. TMS 14.6, Conductor XC3.0, and TelePresence Server 4.1 are the supported versions for CMR Hybrid (WebEx Enabled TelePresence). Details can be found in the TMS 14.6 and Conductor XC3.0 Deployment Guide.

If you haven't already contacted a Cisco partner to go through the A2Q process with you, they will go through your environment with you and make sure you meet the requirements and everything is deployed correct. Once that is done, then your WebEx site will be configured for CMR Hyrbid. Details can be found in the CMR Hyrbid Release Notes (TMS 14.6).