04-11-2016 11:19 AM - edited 03-17-2019 06:01 PM
Dear all,
Webex Meeting Server from 2.5(1) update failed to 2.5(1)MR6.
Is there any suggestions?
Best Regards,
Mesut
04-11-2016 11:50 AM
Hi Mesut,
Updates can fail for many different reasons. Can you share more information about your deployment size, if you have HA and Public access?
Thank you.
-Dejan
04-11-2016 12:13 PM
Hi Dejan,
Size is 50 sim users, there is IRP but no HA.
Did you hear about a hotfix and 2.5(1) version?
Best Regards,
Mesut
04-11-2016 12:37 PM
Hi Mesut,
Are both Admin and IRP VM on the same ESXi host?
Is IRP VM on a DMZ network or the same network where Admin VM is located?
Is ICMP protocol enabled in the DMZ firewall to allow ping between Admin and IRP VMs?
Do you get an issue with ISO update file validation, or the actual update fails?
Have you tried restarting both Admin and IRP VM and trying the update to 2.5.1.6139 again?
There are no known issues with the update from 2.5.1.29 to 2.5.1.6139, so it might be the ISO, connectivity with the IRP VM, times being out of sync.
If you verified all the requirements are fulfilled and it still fails, open a ticket with TAC to take a look at the minorUpgrade.log and yumUpgrade.log files on both Admin and IRP VMs to identify exactly what is happening.
-Dejan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide