cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1018
Views
3
Helpful
2
Replies

XMPP in Mobile Remote Access

Hi all,

Un our company we have deployed collabedge with expressway-c and e. Everything is working out like a charm.

Im pretty lost trying to allow people on gmail or Cisco chat with us.

My doubt is do I have to set a  public SRV pointing to our internal IM&P Server.

Does IM&P server need to reach Internet?

Thanks un advance.

Best Regards

1 Accepted Solution

Accepted Solutions

Kevin Roarty
Cisco Employee
Cisco Employee

Hi Jonas,

If you have already deployed Expressway for Mobile and Remote Access, there are a few incremental steps you can take to enable xmpp federation through the same Expressway.  For public federation the _xmpp-server record points to the Expressway-E hostname.  More details in the following guide,

http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-5/XMPP-Federation-with-Cisco-Expresswa…

Kevin

View solution in original post

2 Replies 2

Kevin Roarty
Cisco Employee
Cisco Employee

Hi Jonas,

If you have already deployed Expressway for Mobile and Remote Access, there are a few incremental steps you can take to enable xmpp federation through the same Expressway.  For public federation the _xmpp-server record points to the Expressway-E hostname.  More details in the following guide,

http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-5/XMPP-Federation-with-Cisco-Expresswa…

Kevin

Thanks so much Kevin I'll go through the guide.