Hello Guys
I trying to re-activate the B-ACD service in CME 8.6 using the "Cisco Configuration Professional" PC-Based Version.
Everything looks fine, but it is not working LOL...
- I have GSM GW with IP: 192.168.130.2 (For incoming calls from GSM to Our CME)
- I have used pilot no. 888555 for aa service and use it inside the GW.
- I have made dial peer 1188 as following config>
------------------------------
dial-peer voice 1188 voip
description aa service
service aa
session protocol sipv2
session target ipv4:192.168.130.2
incoming called-number 888555
dtmf-relay h245-alphanumeric
no vad
-------------------------------
When I call the GSM the, IVR is not responding, instead the line shut off directly.
NOTE:
When change configuration of the GSM GW and redirect the call to my Ext. it works fine and forward the call successfully, which means the the GSM GW and IP connectivity working fine for me.
so, please can you help me to see where is the IVR problem?
