Cisco CME lab on Packet Tracer 7.2

[vince.castro]

Fun lab with Packet Tracer and running Cisco CME with 3 ip phones, 3 laptops, 1 switch, and 1 router.  Fun lab with repetition.  You will be able to test your phones and laptop for connectivity etc.

Solution;

see attached CME Packet Tracer Lab....

Attached are;

> Packet Tracer PKT file that sets you up with the hardware only.

> Lab exercise text.

[vince.castro]

Additional sites for Packet Tracer training and tutorials..

https://www.packettracernetwork.com/

Youtube for Ron Wellman's video;

https://www.youtube.com/watch?v=heIi9ok4HeI

[Rutt]

Old thread but you need to edit the config for ip dhcp pool VOICE: (you mixed the Lo0 ip address with the voice ip range)

> network 10.0.0.0 /24 
> default-router 10.0.0.1
> option 150 ip 10.0.10.1
> ip dhcp exclu 10.0.0.1 10.0.0.9

Should be:

> network 172.16.0.0 /24
> default-router 172.16.0.1
> option 150 ip 10.0.10.1
> ip dhcp exclu 172.16.0.1 172.16.0.9

[vince.castro]

Thanks for the feedback, and yes for this lab the loopback address works and really the focus is on a basic Packet Tracer CME setup.  In real life situations the loopback would be in a different subnet.  thx again