Created by: Alexandr Kryuchkov on 20-06-2013 09:15:19 AM I need a script that works like this:
Caller dials auto attendant pilot number and hears greeting of that sort: “Welcome to X Corp., please dial the extension or wait for operator” <wait timer starts> If caller dials extension, call goes to that extension, if not then wait for timer to expire <wait timer expires> < operator hunt group dials – caller hears ringback> My IOS version is 15.0(1r)M15, so there are 2 build-in IOS tcl scripts: auto-attendant and queue. I think for my purpose I should use "its-CISCO.2.0.3.0” from http://developer.cisco.com/web/vgapi/documentation But what should I do with build-in scripts? And what params and paramspaces I should write in IOS CLI?
Subject: RE: custom auto-attendant script Replied by: Yaw-Ming Chen on 20-06-2013 11:36:09 AM use "its-CISCO.2.0.3.0” forget about buidin
IOS config is like the following
application service my_aa (any name you like) flash:its-CISCO.2.0.3.0.tcl param aa-pilot xxxx paramspace english index 0 paramspace english language en paramspace english location flash: param operator 4100 param max-extension-length <length of extension> paramspace english prefix en
Subject: RE: custom auto-attendant script Replied by: Alexandr Kryuchkov on 21-06-2013 04:36:24 AM Thanks a lot, you really help me !!!!!! Now everything works as I wished it to. Many thanks!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
