HI
I need a help in E1 conenction is showing Deactivated.
Here is the scenario, where E1 conenction is connected to a pbx using Qsig.
The output are showing as below
Global ISDN Switchtype = primary-qsig
ISDN Serial2/0:15 interface
dsl 0, interface ISDN Switchtype = primary-qsig
**** Slave side configuration ****
Layer 1 Status:
DEACTIVATED
Layer 2 Status:
TEI = 0, Ces = 1, SAPI = 0, State = TEI_ASSIGNED
Layer 3 Status:
0 Active Layer 3 Call(s)
#sh controller E1
E1 2/0 is up.
Applique type is Channelized E1 - balanced
Description: VOIP|Ericsson MD110|E1 ISDN|Y|||EQU-1-3-00|||V13|
No alarms detected.
Any help is more appriciated.
Thanks
venkat.
