This document was generated from CDN thread Created by: Jason Shaffer on 30-07-2013 10:11:14 AM Hi Cisco Dev Team,From the Admin Conference UI we can add public accessible endpoint to the conference via SIP. As a note we have not SIP Registrar/Proxy setup nor H323 GK/GW as there will be no calls into the MCU. It seems that when we attempt to add a participant using SIP via API, the system is still using H323. We've tried setting a couple of the other optional param's with no joy. Here is a simplest POST: 1<?xml version="1.0" encoding="iso-8859-1"?>
2<methodCall>
3<methodName>participant.add</methodName>
4<params>
5 <param>
6 <value>
7 <struct>
8 <member>
9 <name>conferenceName</name>
10 <value>
11 <string>Conf01</string>
12 </value>
13 </member>
14 <member>
15 <name>participantName</name>
16 <value>
17 <string>Quan Ccc</string>
18 </value>
19 </member>
20 <member>
21 <name>address</name>
22 <value>
23 <string>vcEndpoint.c60@test.com</string>24 </value>
25 </member>
26 <member>
27 <name>participantProtocal</name>
28 <value>
29 <string>sip</string>
30 </value>
31 </member>
32 <member>
33 <name>authenticationUser</name>
34 <value>
35 <string>admin</string>
36 </value>
37 </member>
38 <member>
39 <name>authenticationPassword</name>
40 <value>
41 <string>12345</string>
42 </value>
43 </member>
44 </struct>
45 </value>
46 </param>
47</params>
48</methodCall>
It's returning a success but when we go to the Admin page of the conference, we see this:https://dl.dropboxusercontent.com/u/1453697/screenshotMCU.pngAny thoughts?Thanks,-jasonSubject: Automatic reply: New Message from Jason Shaffer in TelePresence Developer - Replied by: Mahesha Ruge on 30-07-2013 12:16:11 PMHi,I'm on PTO starting 8th Jul to 2nd Aug and will have no/limited access to my mails during this period.I'll respond to you when I'm back on 5th Aug. Until then you can reach out to cdn-portal-it-support@cisco.com, for any priority requests please contact Santhosh (santhkri@cisco.com).Thanks and Regards,Mahesha Ruge B.Subject: RE: MCU participant.add Replied by: Jason Shaffer on 30-07-2013 03:10:21 PMI guess the PTO responses is good to know let one the mailer is working... Subject: RE: MCU participant.add Replied by: Jason Shaffer on 12-08-2013 01:04:31 AMHi Dev Team,Just wanted to see if anyone had an answer for this.Thanks!-jasonSubject: RE: MCU participant.add Replied by: Thomas Bonhomme on 12-08-2013 05:09:07 AMHi Jason,Could you try with the right spelling? It's "participantProtocol", with an "O".Subject: RE: MCU participant.add Replied by: Jason Shaffer on 14-08-2013 07:20:00 PMThats twice now. Sorry about that Thomas.