This document was generated from CDN thread Created by: Justin Ferello on 13-05-2010 04:24:34 PM Hey all, I have been searching high and low for the answer to this. Anyway what are the min & max values for the 1080p & 720p cameras to use with this command:xCommand Camera PositionSetSet camera position to specified values.Required parameters with (r):CameraId(r): <1..7>Pan: <-65535..65535>Tilt: <-65535..65535>Zoom: <0..65535>Focus: <0..65535>Subject: RE: PHD Values Replied by: Viggo Fredriksen on 18-05-2010 11:40:29 AMHi Justin, here's the ranges for the cameras:1
2 panMin, panMax, tiltMin, tiltMax, zoomMin, zoomMax, focusMin, focusMax
3720p 0, 816, 89, 0, 0, 2768, 4096, 4246
41080p 4X 0, 816, 7, 212, 7, 2877, 4096, 4624
51080p 12X 0, 816, 7, 212, 0, 2885, 4096, 4672
Subject: RE: PHD Values Replied by: Frode M on 25-10-2011 12:44:51 PMHello, are the listed values for the 720p camera correct? tiltMin is 89 and tiltMax is 0?Viggo Fredriksen:
Hi Justin,
here's the ranges for the cameras:
1
2 panMin, panMax, tiltMin, tiltMax, zoomMin, zoomMax, focusMin, focusMax
3720p 0, 816, 89, 0, 0, 2768, 4096, 4246
41080p 4X 0, 816, 7, 212, 7, 2877, 4096, 4624
51080p 12X 0, 816, 7, 212, 0, 2885, 4096, 4672