sip session uri

[cdnadmin]

This document was generated from CDN thread

Created by: Patrick Hartl on 15-01-2010 01:02:32 PM
Hello developer,
 
I have a new problem or challenge 🙂
 
I have a vxml file which makes a sip call transfer.No I hve the problem, the called id should be dynamic.
So I need a variable (<var =...) with the full SIP URI. I tested it with session.connection.remote.uri
but this is only the hostname without the domain and port. But I think I need the complete one.
 
Does anyone knows a session commando for this reason ?
 
thx
Patrick

Subject: RE: sip session uri
Replied by: Yawming Chen on 15-01-2010 05:55:08 PM
Do you mean you need something like this:
 
INVITE sip:[email protected]:5060 SIP/2.0

Can you please specify what exactly you have to get ?

Thx Yawming

Subject: RE: sip session uri
Replied by: Patrick Hartl on 17-01-2010 04:50:08 PM
Hi,
 
I need this fpr the transfer command. As I know, the command should be:
sip:[email protected]:5060
 
So i need a vxml command (for example session.connection.xxxx) to assign a variable with the URI ([email protected]:5060) 
In my lab I have tested this issue. With session.connection.remote.uri I could assign the host (12345).
 
But I need the whole URI. 
 
Or a special command to get the domain !
 
Do you know what I mean ?
 
regards Patrick

Subject: RE: sip session uri
Replied by: Vijay Prasad Neelamegam on 18-01-2010 08:59:01 AM
Hi Patrick,
 
You can tyr using the following commands
 
1) session.connection.originator :
The value for this session variable will be returned as the sip address of the calling party:
SESSION.CONNECTION.ORIGINATOR={ uri="sip:[email protected].x" }
2) session.connection.local.uri
 
Thanks
Vijay
 

Subject: RE: sip session uri
Replied by: Patrick Hartl on 18-01-2010 02:07:17 PM
Thank you - the session.connection.local.uri was the solution !
SOLVED

regards