This document was generated from CDN thread
Created by: Chris Kingsley on 12-08-2010 08:16:30 PM
I have cucm nfr 8.0(2) and trying to develop sip trunk recording. I have followed the instructions for setting up the device, sip trunk, route pattern, recording profile, etc. The system will not generate an INVITE message to my recorder.
Do I need to license the cucm nfr system in order for the sip trunk to work? I get a license warning when I login to the Administration and it shows it in demo mode.
Also, if I dial the DN of the sip trunk from a station, I get a fast busy as soon as I hit the first digit.
Subject: RE: SIP trunk recording
Replied by: Chris Kingsley on 12-08-2010 08:56:43 PM
I had to enable the Cisco IP Voice Media Streaming App, but it is still not working.
