This document was generated from CDN thread
Created by: Pauli Ruhanen on 05-03-2012 04:43:30 PM
Hi,
I was wondering would it be possible to use iSCSI SAN disk(s) as a recording location on the Content Server? I was basicly wondering if the following steps would be possible:
1. Install MS iSCSI software initiator on the TCS OS (Win 2003).
2. Enable the disabled 2nd NIC in the OS and configure it solely for the iSCSI traffic.
3. Map a iSCSI disk (e.g. as disk X) from the SAN in the OS and configure it to be "permanent" during boots etc.
4. In the TCS GUI use e.g. X:\Recorded_media\ as an alternate path in the Media Server Configuration settings.
5. Record a conference call
Regards,
Pauli R.
