Although Cisco Unified Personal Communicator (CUPC) users can login at Cisco Unified Presence (CUP) successfully, the CUPC user status remain offline for some of the users and they are unable to change it to the avaliable state. All functions of the CUPC client are working; however the Instant messenger does not work. The users are unable to do the instant messaging back and forth even though they can add each other as contacts by searching the corporate Active Direct in the CUPC client.
The Show Server Health displays all green check marks and does not report problem with presence. The CUP Diagnostics/Presence Viewer shows the CUPC user is Available, although this status is not showed in CUPC. If we change the CUPC status to Away, the Diagnostics/presence viewer showed the user as Away, but the CUPC does not update this status.
Perform these steps:
Go to CUCM> User Management > End User and confirm that userID is configured exactly the same way on CUCM as in Active Directory. Note that the userIDs are case-sensitive.
If anyone has added themselves in their own contact list in CUPC, remove the same from their own contact list.
Go to Cisco Unified Serviceability > Tools > Control Center - Network Services. Select the Cisco Unified Presence server from the Server menu and restart the Cisco UP Intercluster Sync Agent service.
For CUP 7.0.4 and prior versions, do not enter userid's with the character "&. When the userid contains "&" , presence status is displayed as OFFLINE. Also, refer Cisco Bug ID CSCsy45481.
Hello,We have UCCX 11 Advanced, not Premium. We use this for our Help Desk. We also have a large number of schools where inbound calls to each school point to a hunt group, where if front office at the school does not answer it, the call forwards to...
I recently upgraded my corporate UC systems to 12.4 (from 11.5) in order to implement OAuth for security vice CAPF on Jabber devices. However, once the security profile is set to OAuth, soft phones fail to register through MRA (on Prem devices conti...
Good afternoon, i need to forward any incoming call to an existing DN x600 to ring in 5 other DNs (that are going to use for now cisco jabber in android devices) For that reason i was create the:Line Group which i add the the necessary DNs as a ...
Hi, I appreciate how quickly the Cisco collaboration devices are adapting to the needs of modern conferencing, including their ability to interact with 3rd party devices. The one issue that keeps bothering me are the error warnings, ...
Hi all,my CUBE is sitting between S4B and PSTN and I'm struggling with call-forward. PSTN is expecting the internal number in the PAI header for authentication. We now enabled call-history at the MS site and I do receive a History-Info Header with the rig...