Dear all,
Currently I am verifying for BGP/EVPN configuration on VxLAN-EVPN.
If I check below manual then basically address-family ipv4 unicast is mandatory configuration
however if it is not configures, then I think it can be functioning as l2VPN EVPN right?
For example, if you can issue "show bgp l2vpn evpn summary" then you can see the peer status.
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/vxlan/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_VXLAN_Configuration_Guide_7x/b_Cisco_Nexus_9000_Series_NX-OS_VXLAN_Configuration_Guide_7x_chapter_0100.html
Configuring BGP on the VTEP
Step 4 - address-family ipv4 unicast - address family for IPv4.
Step 5 - address-family l2vpn evpn - address family Layer 2 VPN EVPN under the BGP neighbor.
Best Regards,
Masanobu Hiyoshi