12-07-2021 06:34 AM
Hi!
I am striving to add vlan10 to this VPC trunk.
Here is what I have :
int Po1
swichport mode trunk
switchport trunk allowed vlan 8,9,10
speed 10000
vpc 10
On both switches.
I just added Vlan 10 and it does not work. Any clue ?
(or is it the BigIP right after...?)
Thank you.
Solved! Go to Solution.
12-07-2021 12:10 PM
Hi @joyride_us2
Verify the following:
1. Vlan 10 is configured on both switches
2. VPC is allowed over the VPC Peer Link
3. If both #1 and #2 are ok, verify "show logging log" for any errors in the moment you added the vlan.
Stay safe,
Sergiu
12-07-2021 06:41 AM
When I run :
show vpc 10
-> Active Vlans : 8 and 9
No 10.
12-07-2021 12:10 PM
Hi @joyride_us2
Verify the following:
1. Vlan 10 is configured on both switches
2. VPC is allowed over the VPC Peer Link
3. If both #1 and #2 are ok, verify "show logging log" for any errors in the moment you added the vlan.
Stay safe,
Sergiu
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide