I configured trunking on 4 ports on Cisco Nexus 5548 connected to a Cisco MDS 9148T.
Ports are configured as trunk and carrying multiple vsans
Ports are in a port channel
Ports are configured as E ports
Whether port speed is set to 8G or AUTO on both switches, ports take 20 mins to come up. Some ports eventually come up and are trunking while the rest are stuck in initializing or offline.
What is the best practice for configuring ports on Cisco Nexus 5548 to MDS 9148T ?
Firmware versions:
Cisco Nexus 5548 - NX-OS 7.1.4 (SFP=8G)
Cisco MDS 9148T - NX-OS 8. 3.1 (SFP=32G