Hi
I have a Net App San connected to our Nexus 5k Switches. The current setup is as below.
![Capture.JPG Capture.JPG](https://community.cisco.com/t5/image/serverpage/image-id/29018i9EF45A54170B0782/image-size/large?v=v2&px=999)
This San will be replaced with new SAN. I have to keep both San data-stores presented to ESX hosts until migration completed. Which design option work or not? .
Option1:Adding the new SAN interfaces to the existing setup as below.
Option 2:
Creating new Vlans For NFS and Fcoe
Creating new VSAN and Fcdomain
Adding VLANs to Carry FCoE Traffic Vlan
Creating New Port-Channel and vPC
Creating new Fcalias and adding new Netapp interfaces pwwn (do I have to add the existing SAN Pwwn? To this new Fcalias )
Creating new Zone and add members to the new Zone
Creating a new Zone Set and activate new Zone set (Only one zone set can be activate at one time ?) or add new Zone set to the activate Zone set.
![Capture3.JPG Capture3.JPG](https://community.cisco.com/t5/image/serverpage/image-id/29031iE6DF37CE3E9BBFF2/image-size/small?v=v2&px=200)
Thanks in advanced.