Just looking to see if anyone else has run into this issue.
Has anyone used 25G AOC SFP on the NEXUS 93180YC-EX? We have several DACs that work fine but can't seem to get the port to come up when using the SFP-25G-AOC7M.
We are running NXOS mode ver 7.0(3)I7(2) which shows is supported in Cisco tmgmatrix.
https://tmgmatrix.cisco.com/?si=SFP-25G-AOC7M&npid=43
We are connecting to a QLogic QL41212 25G port ver 3.11.16.0
We have tried the following FEC settings to no avail. The port never comes up.
Cisco 93180 --- HP DL380 Gen 10 Qlogic ql_ah_mbi_8.51.09
FEC Auto --- FEC Auto
FEC off --- FEC off
FEC cl74 --- FEC Fire Code
Going to loop the cable back to another NEXUS port as a next test step.
Any other ideas?
