cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1019
Views
0
Helpful
1
Replies

Issues using SFP-25G-AOC7M on Cisco NEXUS 93180YC-EX ver 7.0.3.i7.2

mseanmiller
Level 1
Level 1

Just looking to see if anyone else has run into this issue.

 

Has anyone used 25G AOC SFP on the NEXUS 93180YC-EX? We have several DACs that work fine but can't seem to get the port to come up when using the SFP-25G-AOC7M.

We are running NXOS mode ver 7.0(3)I7(2) which shows is supported in Cisco tmgmatrix.

https://tmgmatrix.cisco.com/?si=SFP-25G-AOC7M&npid=43

 

We are connecting to a QLogic QL41212 25G port ver 3.11.16.0

 

We have tried the following FEC settings to no avail. The port never comes up.

Cisco 93180    ---        HP DL380 Gen 10 Qlogic ql_ah_mbi_8.51.09

FEC Auto          ---         FEC Auto

FEC off              ---        FEC off

FEC cl74           ---        FEC Fire Code

 

Going to loop the cable back to another NEXUS port as a next test step.

Any other ideas?

1 Reply 1

mseanmiller
Level 1
Level 1
Turns out my server team had a provisioning issue. They were plugging into the wrong ports on their equipment. All works as advertised.

Review Cisco Networking for a $25 gift card