cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
127
Views
0
Helpful
1
Replies
Beginner

N9k vPC with a standalone UCS C-series

N9K1           N9K2

  |                     |  

FEX121       FEX122

  |                    |

eth0--C240--eth1 

 

 

Using vPCs go through FEX and using port-channel 200 to connect the independant Server (C240)

On N9K1 and On N9K2,   type  "Show mad address interface port-channel 200",   found the both sides only detected a same mac address from eth0 itself

I do know what wrong is .  Login to CIMC, there are no where can setup "Port-channel" for the both NICs (eth0,eth1)

Any idea?   Thank you for help !

sam wang
1 REPLY 1
Highlighted
Cisco Employee

Re: N9k vPC with a standalone UCS C-series

Greetings.

Your OS should be able to provide the teaming config for some variant of 802.3ad.

The CIMCs are not currently designed to configure port-channels/link aggregation.

 

Kirk..

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards