11-07-2022 01:19 AM
Planning to migrate nexus N5K-C5672UP to N9K-C93180YC-FX no extra configuration is needed just need to copy and paste old config to new nexsus 9k switch .My question is there any checklist to perform this acitivity orelse i can go with pulg and play?
Solved! Go to Solution.
11-08-2022 03:16 AM
If you mean have a vPC domain with one peer as N5K and another with N9K, then no. You cannot do that.
11-08-2022 02:43 AM
Hi @Mani G
Usually, when I perform similar migrations, there are several things I check:
- the current STP root and what implications are when I add the new switch
- I save the MAC and ARP tables for multiple checks (number of entries, how endpoints are learned and on which ports)
- interface status before and after migration (which are up before and after)
- port-channel status (if LACP is configured) before and after migration
- if routing is configured - routing table and routing adjacencies before and after migration
Basically, I am taking a snapshot of the current state of the switch and network before migration, and compare it with after migration.
Hope it helps,
Sergiu
11-08-2022 02:57 AM
Thanks! Can i pair vPC between Nexus5K and Nexus9K while migration.
11-08-2022 03:16 AM
If you mean have a vPC domain with one peer as N5K and another with N9K, then no. You cannot do that.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: