Dears,
I am trying to configure SNMP community on of the N9K switches but i am getting this message:
"cannot make changes for SNMP community".
switch tacacs config are:
aaa group server tacacs+ ACS
snmp-server enable traps aaa server-state-change
aaa authentication login default group ACS local
aaa authentication login console group ACS local
aaa authorization config-commands default group ACS local
aaa authorization commands default group ACS local
aaa authorization config-commands console group ACS local
aaa authorization commands console group ACS local
aaa accounting default group ACS
aaa authentication login error-enable
!
!
feature tacacs+
tacacs-server key 7 mmx
tacacs-server host 10.1.4.222 key 7 mmx
tacacs-server host 10.1.4.223 key 7 mmx
aaa group server tacacs+ ACS
tacacs-server directed-request
Any idea??