Nexus Port-Channel question

[benolyndav]

Hi

We have a port-channel between our x2 nexus 5500's and our 3750 2 switch stack, one of the member interfaces is down on the nexus side due to the sfp being pulled out/unseated, is it safe to just reseat and the interface will come up in the port-channel ok or would you suggest another approach.??

Thanks

[Sergiu.Daniluk · Accepted solution]

It's safe to simply connect the SFP back. The interface is part of a port-channel so from perspective of traffic flow, no impact should be seen.

Stay safe,

Sergiu