cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
327
Views
0
Helpful
3
Replies
Netmart
Beginner

Nexus System Polcies __pfm_fanabsent_any_singlefan

Hello,

I was wondering where the system policies are managed, such as __pfm_fanabsent_any_singlefan

on platfrom Nexus7700 C7710:

 

It's not visible under system-policies:

 

1# sh event manager system-policy
Name : __ethpm_debug_1
Description : Action: none
Overridable : Yes

Name : __ethpm_debug_2
Description : Action: none
Overridable : Yes

Name : __ethpm_debug_3
Description : Action: none
Overridable : Yes

Name : __ethpm_debug_4
Description : Action: none
Overridable : Yes

Name : __ethpm_link_flap
Description : More than 30 link flaps in 420 seconds interval. Action: Error Disable the port
Overridable : Yes

 

Please advise.

 

Thanks

2 ACCEPTED SOLUTIONS

Accepted Solutions
Sergiu.Daniluk
VIP Engager

You do not see them because you are not in default VDC. Use the same command in the default vdc and you will see them all, including the __pfm_fanabsent_any_singlefan

N7K# show event manager system-policy | grep Name.*fan
           Name : __pfm_fanabsent_any_singlefan
           Name : __pfm_fanabsent_hotinlet
           Name : __pfm_fanabsent_multi_fan
           Name : __pfm_fanbad_any_singlefan
           Name : __pfm_fanpresent_mismatch

Stay safe,

Sergiu

View solution in original post

The "switchback" command in VDC X will only work when you actually use "switchto vdc X" command in the default VDC to switch to that VDC X. Otherwise will not do anything. To access the default VDC you can simply ssh to the it's mgmt IP.

 

Cheers,

Sergiu

View solution in original post

3 REPLIES 3
Sergiu.Daniluk
VIP Engager

You do not see them because you are not in default VDC. Use the same command in the default vdc and you will see them all, including the __pfm_fanabsent_any_singlefan

N7K# show event manager system-policy | grep Name.*fan
           Name : __pfm_fanabsent_any_singlefan
           Name : __pfm_fanabsent_hotinlet
           Name : __pfm_fanabsent_multi_fan
           Name : __pfm_fanbad_any_singlefan
           Name : __pfm_fanpresent_mismatch

Stay safe,

Sergiu

View solution in original post

Thank you Sergiu.

I assume in order to switch to default VDC the following command has to be applied on Privilege Level:

 

1# sw?
switchback Switchback to default vdc

The "switchback" command in VDC X will only work when you actually use "switchto vdc X" command in the default VDC to switch to that VDC X. Otherwise will not do anything. To access the default VDC you can simply ssh to the it's mgmt IP.

 

Cheers,

Sergiu

View solution in original post

Content for Community-Ad
This widget could not be displayed.