Hi , all
We are facing TCAM resource problem on nexus 93180 ,I want to free up some tcam resource by removing default config,. such as Ingress L3/VLAN QOS and Ingress L2 QOS feature.
but I don't know what will happened after I release qos tcam resource and increasing RACL tcam resource.
we don't config QoS on datacenter vxlan network , but is there any problem on some ospf , copp, bgp, signaling control after i remove tcam for qos?
thank you
Jere
INSTANCE 0x0
-------------
ACL Hardware Resource Utilization (Mod 1)
----------------------------------------------------------
Used Free Percent
Utilization
-------------------------------------------------------------------
Ingress L2 QOS 0 256 0.00
Ingress L2 QOS IPv4 0 0.00
Ingress L2 QOS IPv6 0 0.00
Ingress L2 QOS MAC 0 0.00
Ingress L2 QOS ALL 0 0.00
Ingress L2 QOS OTHER 0 0.00
Ingress L2 SPAN ACL 0 256 0.00
Ingress L2 SPAN ACL IPv4 0 0.00
Ingress L2 SPAN ACL IPv6 0 0.00
Ingress L2 SPAN ACL MAC 0 0.00
Ingress L2 SPAN ACL ALL 0 0.00
Ingress L2 SPAN ACL OTHER 0 0.00
Ingress RACL 1792 0 100.00
Ingress RACL IPv4 1790 99.89
Ingress RACL IPv6 0 0.00
Ingress RACL MAC 0 0.00
Ingress RACL ALL 2 0.11
Ingress RACL OTHER 0 0.00
Ingress L3/VLAN QOS 28 484 5.47
Ingress L3/VLAN QOS IPv4 4 0.78
Ingress L3/VLAN QOS IPv6 2 0.39
Ingress L3/VLAN QOS MAC 1 0.20
Ingress L3/VLAN QOS ALL 4 0.78
Ingress L3/VLAN QOS OTHER 0 0.00
Ingress SUP 443 21 95.47
Ingress SUP IPv4 139 29.96
Ingress SUP IPv6 180 38.79
Ingress SUP MAC 38 8.19
Ingress SUP ALL 12 2.59
Ingress SUP OTHER 74 15.95
