05-09-2020 09:50 AM
I have the maximum VDCs on a 7K and need to reallocate that VDC to support f2 fe card from m1 f1 type. I need to know if this will be service affecting to the rest of the switch? Assume that I would need to:
no allocate interface Ethernet1/10-12,Ethernet1/41
no limit-resource module-type m1 f1 m1xl m2xl
limit-resource module-type f2 f2e
allocate interface Ethernet2/1-48
Thanks in advance!
Solved! Go to Solution.
05-09-2020 11:10 AM
Hi @RWSdude
Apart of the impact on ports Ethernet2/1-48 and all M1/F1 ports allocated to the respective VDC subject to change, there should be no impact on the rest of the VDCs/ports.
Regards,
Sergiu
05-09-2020 11:10 AM
Hi @RWSdude
Apart of the impact on ports Ethernet2/1-48 and all M1/F1 ports allocated to the respective VDC subject to change, there should be no impact on the rest of the VDCs/ports.
Regards,
Sergiu
05-09-2020 12:01 PM
05-09-2020 12:08 PM
So the removed ports return to the unallocated VDC 0, specifically ports 10-12 & 41? What happens when I reallocate them to module 1, they will return to mod 1 in a shutdown state with no impact to mod 1?
Thanks.
05-09-2020 04:28 PM
All configuration is lost when moving ports between VDC and they will be in shutdown state.
There's documentation about this here:
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide