Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
1105
Views
0
Helpful
2
Replies

VXLAN Gateway

rishad ahammed
Level 1
Level 1

‎11-07-2018 05:11 AM - edited ‎11-07-2018 05:12 AM



Hi


  I am trying to configure VXLAN based on flood and learn method.

Can any one provide sample configuration or good article for configuring VXLAN L3 gateway (SVI) on switch. Most of the configuration i had seen is based on bridge domain as below. Is there any other method.

 


encapsulation profile vni VSI_50_TO_5000
  dot1q 50  vni 5000
encapsulation profile vni VSI_75_TO_7500
    dot1q 75  vni 7500
bridge-domain 50
  member vni 5000
bridge-domain 75
  member vni 7500

interface nve1
  no shutdown
  source-interface loopback10
  member vni 5000 mcast-group 209.165.1.1
  member vni 7500 mcast-group 209.165.1.1

interface Bdi50
 no shutdown
 ip address 10.50.50.51/24

interface Bdi75
 no shutdown
 ip address 10.75.75.76/24


 

 


Labels:
0 Helpful
2 Replies 2

ADP_89
Level 1
Level 1

‎11-08-2018 07:32 AM

Hello,

 

Configuration examples are dependent on the platform. Which one is yours?

 

Thanks,

ADP

0 Helpful

rishad ahammed
Level 1
Level 1
In response to ADP_89

‎11-11-2018 10:28 PM

Hi

 

Thank you for the reply.I am using N5K-5672UP as leaf and N9K-C93240YC as spine

0 Helpful
Customers Also Viewed These Support Documents

Review Cisco Networking for a $25 gift card