cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco DevNet Sandbox Lab VPN login failed

sujanareddy
Beginner
Beginner

Getting Login Failed error with the provided credentials. 

 address : devnetsandbox-emea-gwy.cisco.com:20XXX

username: sujanaredd

23 REPLIES 23

evengata1
Beginner
Beginner

@bigevilbeard I have setup a sandbox but the vpn credentials are not working. It says login failed

Lab Network Address: devnetsandbox-emea-gwy.cisco.com:20214
Username: evengata1
Password: RJFJECDP

@evengata1 i tried with your information above, but it looks like your reservation has ended. Suggest to reserve a new one and see the troubleshooting steps from above.

 

Hope this helps.

joesiegfried
Beginner
Beginner

I am unable to connect my vpn to the sandbox?,  Connection attempt has timed out Anyconnect said to check my internet

2:49:33 PM Connection attempt has failed.
2:49:33 PM Unable to contact devnetsandbox-emea-gwy.cisco.com.

  • Lab Network Address: devnetsandbox-emea-gwy.cisco.com:20193

Check your outbound ports are open. The port range will be anywhere from TCP 20100 through TCP 20354. Give that a try and you should be good to go. If that's not working, keep in mind VPNs also use TLS (TCP 443) and DTLS (UDP 443). Though typically these are open in most organizations.

 

You can test your connection also by tethering to your cellular device.

 

Hope this helps.

Avishkar Naicker
Beginner
Beginner

I am having the same problem Connecting to the NX-OS Nexus with 9Kv Lab.

Connecting to: devnetsandbox-emea-gwy.cisco.com:20220, When entering my credentials it states login failed.

 

 

gpietrantoni
Beginner
Beginner

Same problem for me:

Your lab's private VPN connection information:
Lab Network Address: devnetsandbox-usw1-reservation.cisco.com:20198
Username: gpietranto
Password: XXXXX
Cannot login from my house DSL & from my mobile phone

same problem 

I cont. login with cisco any connect  login failed 

 

Lab Network Address : devnetsandbox-usw1-reservation.cisco.com:20151

Username: it_waledya.  

 

 

 

@walid4800  Check your outbound ports are open. The port range will be anywhere from TCP 20100 through TCP 20354. Give that a try and you should be good to go. If that's not working, keep in mind VPNs also use TLS (TCP 443) and DTLS (UDP 443). Though typically these are open in most organisations.

 

You can test your connection also by tethering to your cellular device.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: