09-18-2017 06:57 AM - edited 06-04-2019 02:33 AM
Within the Firepower 4110 with single asa sandbox. Neither the Chassis or the ASA is available via either ssh or https. the only device I was able to connect to was the Server VM. Please take a look, need to get an ASA config tested. I found a post earlier that had the same issue and it required Devnet to fix.
Thanks!
Solved! Go to Solution.
09-20-2017 08:03 AM
James,
Can you try spinning up the Firepower lab again and verifying you can get access to the Blade (10.10.20.30). Also, it seems that ssh access to the ASA virtual device is not working and we are looking at that. In the meantime, you can console to teh asa through the firepower blade as follows:
ssh admin@10.10.20.30
F!repower
connect module 1 console
username: admin
Password: cisco
en
no enable password configured. just hit enter.
Joe
09-19-2017 06:35 PM
Anyone have any suggestions? I've tried ending the sandbox and reserving a new one, same result. It appears that the sandbox image is broken from the start. Not a very helpful environment to test the 4110 if it doesn't provide access to the 4110 or the ASA image that's running on it.
09-20-2017 01:05 AM
James,
Apologies for the delay. We will be checking on this issue later today. I can provide an update to you in the afternoon (GMT).
Regards,
Joe Kearns
09-20-2017 01:13 AM
James,
I need to end your reservation to troubleshoot the issue. You will be able to rebook the session once its back up.
We will let you know.
Joe
09-20-2017 08:03 AM
James,
Can you try spinning up the Firepower lab again and verifying you can get access to the Blade (10.10.20.30). Also, it seems that ssh access to the ASA virtual device is not working and we are looking at that. In the meantime, you can console to teh asa through the firepower blade as follows:
ssh admin@10.10.20.30
F!repower
connect module 1 console
username: admin
Password: cisco
en
no enable password configured. just hit enter.
Joe
09-21-2017 02:34 AM
James,
Going to close this case. We can reactivate if you see any other issues.
Thanks,
Joe
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide