cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
452
Views
1
Helpful
7
Replies

Connection to IOS XE on Catalyst Always-On

nazgul99.01
Level 1
Level 1

Trying to connect  IOS XE on Catalyst Always-On by ssh and get response - connection reset by peer. On Quick Access show status - SSH Connection Failed. Can you help to resolve a problem?

image.png

nazgul9901_0-1708768874620.png

 

7 Replies 7

reset by peer 

can you check the session timeout and idle timeout

liviu.gheorghe
Spotlight
Spotlight

Hello @nazgul99.01 ,

can you do a debug ip ssh on the IOS XE box?

Regards, LG
*** Please Rate All Helpful Responses ***

Typically happen when another uses has made changes and locks others out of the device. Maybe wait a little while for the device to reset.

Hope this helps.

Please mark this as helpful or solution accepted to help others
Connect with me https://bigevilbeard.github.io

Ruben Cocheno
Spotlight
Spotlight

@nazgul99.01 

Someone just lock out the setup, wait for 4 to 8 hours before try again.

Tag me to follow up.
Please mark it as Helpful and/or Solution Accepted if that is the case. Thanks for making Engineering easy again.
Connect with me for more on Linkedin https://www.linkedin.com/in/rubencocheno/

ansiblenovice
Level 1
Level 1

This has been going for at least 24hrs since I've noticed.

Disregard, the URL has been changed to: devnetsandboxiosxe.cisco.com

NM, that still resolves to the same IP, which still has the same issue:

ubuntu@touching-blesbok:~$ ssh admin@devnetsandboxiosxe.cisco.com

kex_exchange_identification: read: Connection reset by peer

Connection reset by 131.226.217.181 port 22