Yesterday CUCM worked without issue. I tried to continue testing and my AXL and RisPort requests timed out. I tried to load cucmadmin in a browser and it times out. I also cannot connect via SSH either. I also tried the subscriber with no luck.
I used the sandbox workspace to power cycle CUCM and have the same results. I can ping the publisher and tracert shows resolution. Jabber registers for IM&P but the phone does not register, just spins saying "Setting Phone".
We have also tried to connect from another machine with the same results. I RDP'd to the domain server and was not able to open the cucmadmin page from it either.
Any other thoughts on troubleshooting?
From my machine over VPN:
PS > tracert 10.10.20.1
Tracing route to hq-cucm-pub.abc.inc [10.10.20.1]
over a maximum of 30 hops:
1 187 ms 159 ms 166 ms hq-cucm-pub.abc.inc [10.10.20.1]
Trace complete.
PS > ping 10.10.20.1
Pinging 10.10.20.1 with 32 bytes of data:
Reply from 10.10.20.1: bytes=32 time=88ms TTL=63
Reply from 10.10.20.1: bytes=32 time=88ms TTL=63
Reply from 10.10.20.1: bytes=32 time=135ms TTL=63
Reply from 10.10.20.1: bytes=32 time=208ms TTL=63
Ping statistics for 10.10.20.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 88ms, Maximum = 208ms, Average = 129ms
