01-12-2016 04:47 AM - edited 06-04-2019 02:21 AM
Hello,
Last time we used the sandbox, some months ago, we received a user for anyconnect, and a config file for a connection site-to-site with a 871 router.
This time, we don’t have the config for a 871, only the anyconnect user.
We need to connect a lan with some devices to the sandbox, so we absolutely need a VPN site-to-site.
Thanks,
Solved! Go to Solution.
01-12-2016 05:55 AM
Hello Joseph,
I made the change,
I think it’s ok now.
=>
IPT-sandbox# ping 10.10.10.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.10.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 28/31/32 ms
Thanks for your help, and best regards,
Gildas
01-12-2016 04:49 AM
Hi,
What Sandbox have you booked? is this IVT related or are you booking a separate lab?
Thanks,
Joe
01-12-2016 04:52 AM
Hi,
We’ve booked the contact center sandbox but this is not within an IVT process.
Philippe
01-12-2016 04:57 AM
Hi,
Have you connected to this sandboxes (or any of our sandboxes) before with a router?
We used EasyVPN configuration on a cisco 800 series router to build a tunnel back to the sandbox. Do you have a router on your side for this connection?
Regards,
joe
01-12-2016 05:06 AM
Yes, we have a 871, and yes, we have connected to the DevNet Endpoint and Accessory IVT Sandbox Environment. some months ago, and we received a file "871-confg" with the key elements for the VPN config.
01-12-2016 05:13 AM
ok,
I see you have a running Contact Center Enterprise reservation. can you please send me the current configuration on your 871 router? please send to jokearns@cisco.com
Joe
01-12-2016 05:19 AM
Ok, I 'll do that.
FYI, I didn't modify it since the last sandbox, so the VPN config is still present.
01-12-2016 05:20 AM
Thats ok. you will now be connecting to a different sandbox so the configuration will need to change.
Joe
01-12-2016 05:25 AM
Of course. We just need the information for the new VPN connection.
01-12-2016 05:36 AM
Hi,
just sent you new connection information in an email.
regards,
Joe
01-12-2016 05:55 AM
Hello Joseph,
I made the change,
I think it’s ok now.
=>
IPT-sandbox# ping 10.10.10.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.10.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 28/31/32 ms
Thanks for your help, and best regards,
Gildas
01-12-2016 05:24 AM
Sent, from gcoutansais.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide