12-22-2023 09:25 AM
This sandbox is supposed to support netconf and restconf. SSH on port 22 and Netconf on port 830 are working but restconf on 443 is not. Using postman it appears that a nginx (reverse proxy?) is not forwarding the packets but returning a 404 NOT FOUND.
Solved! Go to Solution.
12-22-2023 01:06 PM
@jefcorco I read in another thread that port 443 was temporarily removed for security reasons. Checking the listed open port for the sbx 443 is no longer listed https://devnetsandbox.cisco.com/DevNet/catalog/ios-xe-always-on
I would use the reserved one if you require 443 until this is added back.
hope this helps
12-22-2023 01:06 PM
@jefcorco I read in another thread that port 443 was temporarily removed for security reasons. Checking the listed open port for the sbx 443 is no longer listed https://devnetsandbox.cisco.com/DevNet/catalog/ios-xe-always-on
I would use the reserved one if you require 443 until this is added back.
hope this helps
12-22-2023 05:28 PM
@bigevilbeard I had already moved on to the reserved one earlier today and that worked. I had used the always-on for restconf in the past and thought that it still mentioned it supported this in the sandbox description but I must have glossed over that.
I was looking for the "open port" list that you were talking about but didn't see it. Can you point me to that specifically for future reference?
Thanks for your help!
12-23-2023 12:18 AM
No problem - Under the instructions, you can find this info
Access Details:
Developers and network engineers access the IOS XE on Catalyst 17.11.x sandbox directly using the following information:
Cat8000v Host
Address: sandbox-iosxe-latest-1.cisco.com
Username: admin
Password: C1sco12345
NETCONF port: 830
gRPC telemetry port: 57500
ssh port: 22
Example Connection: ssh sandbox-iosxe-latest-1.cisco.com
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide