NX-API Always-on Sandbox can't connect to switches

[steffenwebb]

i can ping the ubuntu host, but no ping or ssh access to the switches.

VPN client has following routes :

10.10.0.0/16

172.16.255.0/24

172.16.1.0/24

172.16.7.0/24

10.10.20.100/32

Best regards Steffen Webb

[steffenwebb]

from the ubuntu host

cisco@ubuntu:~$ ping 172.16.1.82

PING 172.16.1.82 (172.16.1.82) 56(84) bytes of data.

From 10.10.10.190 icmp_seq=1 Destination Host Unreachable

From 10.10.10.190 icmp_seq=2 Destination Host Unreachable

From 10.10.10.190 icmp_seq=3 Destination Host Unreachable

From 10.10.10.190 icmp_seq=4 Destination Host Unreachable

From 10.10.10.190 icmp_seq=5 Destination Host Unreachable

From 10.10.10.190 icmp_seq=6 Destination Host Unreachable

[eublack · Accepted solution]

Hello Steffan,

The current topology diagram requires an update due to migration of this platform onto a new VCentre. This will be updated early next week. In the meantime, please use the following IP address information to gain OOB to each nx-osv instance:

nx-osv-1 -----> 172.16.1.90

nx-osv-2 -----> 172.16.1.91

nx-osv-3 -----> 172.16.1.92

nx-osv-4 -----> 172.16.1.93

regards,

Eugene Black

[steffenwebb]

Is there any special configuration to be done??

I can't access the API website on the switch.

I have tried to configure nxapi sandbox command. Not result.

-Steffen

[eublack]

Hello Steffan,

It looks like NX-API interface is disabled on 172.16.1.90 (nx-osv-1) via command - no nxapi http in config. Not sure why this is the case. I checked on nx-osv-2 (172.16.1.91) and interface is available: